Flat samples: 0 - 7mm thick and 30mm wide

Cylindrical specimens: Ø 4 - 9 mm

samples can be connected to the device.

Power Capacity: 10kN

The requested test standard must be shared with the personnel and approval must be obtained before any action is taken.

The test samples should be delivered to our unit ready in accordance with the requested test standard.

Flat samples: 0 - 19.1 mm thick

Cylindrical specimens: Ø 5.8 - 22.9 mm

samples can be connected to the device.

Power Capacity: 25 kN

Torque: 200 Nm

Sample dimensions (pre-process): 30-714 mm

Sample dimensions (post-process): 284-1222 mm

The requested test standard must be shared with the personnel and approval must be obtained before any action is taken.

The test samples should be delivered to our unit ready in accordance with the requested test standard.

Flat samples: 0 - 20.5 mm thick

Cylindrical specimens: Ø 3 - 27.2mm

samples can be connected to the device.

In order to accurately measure the modulus of elasticity on demand

extensometer (L0 = 25mm) is used.

Power Capacity: 100 kN

Sample dimensions (pre-process): 140-1283 mm

Sample dimensions (post-process): 363-1753 mm

The requested test standard must be shared with the personnel and approval must be obtained before any action is taken.

The test samples should be delivered to our unit ready in accordance with the requested test standard.

1- Puncture Test (Composite, Plastic) (ISO 6603)

2- Charpy Metal Test (ASTM E23)

3- Charpy Plastic Edgewise (ISO 179)

4- Charpy Plastic Flatwise (ISO 179)

5- Pipe Test (Ø10 - 160 mm) (ASTM D2444 A)

6- Tensile - Impact Test (ISO 8256 A)

7- Thin Film Tensile Test (ISO 8256 A)

8- Puncture Film Test (ISO 6603)

Maximum Potential Energy: Tests up to 1250 Joules can be made.

Sensor Capacity: 90 kN

Piezo Sensor Capacity: 0.45 kN

Tests can be performed at temperatures between +100°C and -50°C

Metal-based materials can only be used in the Charpy test.

Composite, plastic and wood-based materials can be used in other tests.

1mm and below or film materials can be tested.

Test samples should be delivered to our unit as ready in the size of the test standard.

Please contact the staff for the necessary information.